Accessing RemotelyAnywhere

When the installation is complete, the default Internet browser will open with the address of http://MachineName:2000.

To access the host machine from a different machine, open an Internet browser and enter http://111.111.11.1:2000 in the Location/Address line. 111.111.11.1 represents the IP address of the host machine. 2000 represents the default port shown on the Software Options page during installation. If you changed this port during installation, then use the specified port when accessing RemotelyAnywhere. On the same network the machine name can also be used.

On the host itself you can access a machine by entering the loopback address http://127.0.0.1:2000 at the Location/Address line. This address allows the user to communicate with the RemotelyAnywhere installation only at the machine on which it is installed.